• : 48103128 , 3198619127
  • : 086-632-5115110 , 086-632-5115112
  • : info@makemachinetools.com

MAKE

    Home > News >

Zaozhuang Make radial drilling machine daily maintenance

Zaozhuang Make Machinery Co., Ltd.radial drilling machine daily maintenance

1. Clean the surface and dead corner of the machine tool, remove and wash the covers. It is required that the inside and outside of the machine should be clean without rust and yellow robe. The paint should be natural color and iron should be bright. Clean the guide rail surface and remove the burr on the working table. Check and supplement the screws, handball and handboard, and check the flexibility and reliability of each handle.

2. Maintenance of main shaft feed box of radial drilling machine: check the oil quality and keep it in good condition, and the oil quantity meets the requirements. Remove the burr of spindle taper hole. Clean the hydraulic transmission system and oil filter net, and adjust the oil pressure.

3. Inspection of rocker arm and lifting clamping mechanism of radial drilling machine: check and adjust the lifting mechanism and clamping mechanism to achieve sensitivity and reliability.

4. Inspection for lubrication system of radial drilling machine: clean the felt, and make sure that the oil cup is complete, the oil path is smooth, and the oil window is bright.

5. Inspection for cooling system of radial drilling machine: clean cooling pump, filter and cooling liquid tank. Check the coolant pipeline and ensure there is no water leakage.

6. Inspection of electrical system of radial drilling machine: clean the dust inside and outside the motor and electrical box. Turn off the power supply, open the electrical door cover, and check the electrical connector and electrical components for looseness and aging. Check the limit switch for proper operation. Whether the power failure of door opening works. Check whether the hydraulic system is normal and whether there is oil leakage. Whether the electrical control switch is normal.

7. Check the oil quality and keep it in good condition, and the oil quantity meets the requirements.

8. Remove the burr of spindle taper hole.

9. Clean the hydraulic transmission system and oil filter net, and adjust the oil pressure.

10. Remove the impurities on the spindle and inject oil on the spindle to ensure the lubrication of the spindle.

ZQ3040, ZQ3050 series radial drilling machines are on sale!

Radial drilling machine is easy to operate, flexible, wide range of application, very popular with customers!

Zaozhuang Make Machinery Co., Ltd. adheres to the purpose of customer service and provides good products and services for customers

Welcome to consult!

(Responsible editor:admin)
TOP